TUW-si50 Heat Transfer Fluid
TUW-si50
minimum order:
1 kilogram
Supply Ability:
500kilogram / Day
Stock Time:
3Day
Quantity:
Product Introduction：
Synthetic thermal oil is a colorless, odorless, transparent liquid with a low pour point and
good low-temperature fluidity, thermal conductivity, and thermal stability. More suitable for
liquid-phase use in open heating systems, compared to synthetic hydrocarbon heat transfer
oils, it has better oxidation resistance and slower oxidation rate. It is used as a
refrigerant/heat medium for rapid heating/cooling alternating operation in cooling/heating
systems, and provides good temperature control accuracy and low-pressure operation.
Recommended operating temperature ：
--30~300℃
Product attributes：
Appearance: Colorless, odorless, transparent liquid
Density (g/cm ³): 0.960
Pour point (℃): -70
Boiling point (℃):>300
Kinematic viscosity (mm2/s, 25 ℃): 50
Flash point (℃): 318
Main uses of the product:
1. Pharmaceutical industry jacket (double-layer, three-layer) glass reaction kettle/high and low
temperature body circulation machine/low temperature, constant temperature reaction bath;
2. Synthesis, distillation, and purification of fine chemical intermediates;
3. Application fields such as constant temperature baths, experimental and small-scale, and pilot
scale reaction vessels in laboratories of colleges and research institutions.
Productsafety and precautions：
1)Local normal protection and industrial hygiene regulations related to chemical
treatment must be followed, and inhalation of thermal decomposition products is not
allowed. Avoid skin contact with high-temperature substances.
2)Do not eat, drink, or smoke when using this product. Thoroughly clean after
operation. Avoid releasing into the environment. Avoid contact with oxidants such
as chlorine, chromic acid, etc.
3)When using this product, you should follow the information and recommendations
provided in our chemical safety technical manual. Basic preventive measures for
handling chemicals should also be in place
