3M Perfluoropolyether Oil Replacement TUW Series, Long Lasting Lubrication Solution for High Temperature and Corrosive Environments
2025-02-25
Perfluoropolyether is a kind of high temperature lubrication material, which is characterized by high temperature resistance, corrosion resistance, low surface tension and so on, and is widely used in electronics, aerospace, aviation, automotive, chemical industry and so on.3M: 3M has been investing in the research and development of perfluoropolyether products since the 1950s, and has become a leading company in the field of perfluoropolyether. Its products mainly include two series, Krytox and Fluorinert, of which Krytox has a wide range of applications and can be used for lubrication of high-speed bearings and electronics industry, while Fluorinert is mainly used in semiconductors and electronics, etc. 3M will withdraw from the development of perfluoropolyether products this year. Since 3M company will quit the R&D and production of perfluoropolyether products in this year, so our company will launch the products which can replace perfluoropolyether products.
Among the perfluoropolyether oil series products are:
TUW-90
TUW-130
TUW-170
TUW-200
TUW-200
TUW-235
TUW-270
TUW-7100
TUW-7200
TUW-7300
TUW-7500
Among the perfluoropolyether oil series products are:
TUW-90
TUW-130
TUW-170
TUW-200
TUW-200
TUW-235
TUW-270
TUW-7100
TUW-7200
TUW-7300
TUW-7500
3M Novec Supplies Ring Alarm Bells at End of Quarter as Production Risks Surge, Tuwchem a Reliable Alternative
The Surging Demand for Immersion Liquid Cooling in the Wave of the Digital Economy
Related Article
Traditional PCB conformal coating is thick, leaves BGA areas uncovered, and damages pads during rework. This article compares TUW-2704 and TUW-1700 fluoropolymer ultra-thin coatings on film thickness, rework, and protection, and provides selection guidance for NEV electronic control and consumer PCBs.
PCB Nano Conformal Coating Selection: TUW-2704 & TUW-1700 vs. Traditional Conformal Coating
TUW-40 is a single-component perfluorinated heat-transfer fluid covering a liquid range of -55°C to 155°C. With a high boiling point and extremely low evaporation, it is designed for temperature control in etching equipment, ion implantation equipment, and inspection tools. This article details its physical properties, application scenarios, and positioning within the TUW series.
TUW-40 High-Temperature Perfluorocarbon Fluid: -55°C to 155°C Wide Temperature Range — Temperature Control for Etching and Ion Implantation High-Temperature Operations
TUW-7200 is a thermally stable perfluorinated liquid that can be used as an electronic cleaning agent, precision cleaner, grease cleaner, cooling medium, hermeticity test fluid, thermostatic fluid, and extraction solvent. This article details its six uses and NO PFAS environmental attributes, and provides guidance on selecting a domestic alternative.
TUW-7200 Electronic Fluorinated Fluid: Precision Cleaning, Hermeticity Leak Testing, Thermostatic Bath — One Fluid for Three Uses, NO PFAS Domestic Alternative
TUW-347 and TUW-458 are two hydrofluoroether (HFE) eco-friendly solvents commonly used for cleaning, drying, dust removal, and non-condensable gas elimination. TUW-458 can also serve as a synthesis feedstock and electrolyte additive. This article details the chemical identities, technical parameters, application scenarios, and selection differences between the two products.
HFE Eco-Friendly Solvents TUW-347 & TUW-458: The "Invisible Assistants" for Drying, Dust Removal, and Non-Condensable Gas Elimination