3M Novec Supplies Ring Alarm Bells at End of Quarter as Production Risks Surge, Tuwchem a Reliable Alternative
2025-03-01
The first quarter is coming to an end, and at the same time, the supply of the 3M™ Novec™ Perfluorinated products line is about to run out. This news is like a butterfly effect that could put your production line at risk of shutting down. So every delayed action increases the risk. Here's how:
High downtime costs: Once production is forced to stop, high downtime costs will snowball.
Delivery defaults: Missed delivery deadlines can result in a serious blow to customer trust.
Financial devastation: Not to mention the nightmare of product recalls and financial losses from production delays that will hit your bottom line.
You need a supplier who can replace it. You need to take action. Tuwchem-Reliable and Stable.
High downtime costs: Once production is forced to stop, high downtime costs will snowball.
Delivery defaults: Missed delivery deadlines can result in a serious blow to customer trust.
Financial devastation: Not to mention the nightmare of product recalls and financial losses from production delays that will hit your bottom line.
You need a supplier who can replace it. You need to take action. Tuwchem-Reliable and Stable.
●TUW-40 Replacement for FC-40
●TUW-3283S Replacement for FC-3283
●TUW-3283E Replacement for FC-3283E
●TUW-7100 Replacement for Novec-7100
●TUW-7200 Replacement for Novec-7200
●TUW-7300 Replacement for Novec-7300
●TUW-3283E Replacement for FC-3283E
●TUW-7100 Replacement for Novec-7100
●TUW-7200 Replacement for Novec-7200
●TUW-7300 Replacement for Novec-7300
●TUW-7500 Replacement for Novec-7500
TUW-7100 Replaces 3M™ Novec™ 7100 for Efficient Degreasing of Precision Electronics
3M Perfluoropolyether Oil Replacement TUW Series, Long Lasting Lubrication Solution for High Temperature and Corrosive Environments
Related Article
Traditional PCB conformal coating is thick, leaves BGA areas uncovered, and damages pads during rework. This article compares TUW-2704 and TUW-1700 fluoropolymer ultra-thin coatings on film thickness, rework, and protection, and provides selection guidance for NEV electronic control and consumer PCBs.
PCB Nano Conformal Coating Selection: TUW-2704 & TUW-1700 vs. Traditional Conformal Coating
TUW-40 is a single-component perfluorinated heat-transfer fluid covering a liquid range of -55°C to 155°C. With a high boiling point and extremely low evaporation, it is designed for temperature control in etching equipment, ion implantation equipment, and inspection tools. This article details its physical properties, application scenarios, and positioning within the TUW series.
TUW-40 High-Temperature Perfluorocarbon Fluid: -55°C to 155°C Wide Temperature Range — Temperature Control for Etching and Ion Implantation High-Temperature Operations
TUW-7200 is a thermally stable perfluorinated liquid that can be used as an electronic cleaning agent, precision cleaner, grease cleaner, cooling medium, hermeticity test fluid, thermostatic fluid, and extraction solvent. This article details its six uses and NO PFAS environmental attributes, and provides guidance on selecting a domestic alternative.
TUW-7200 Electronic Fluorinated Fluid: Precision Cleaning, Hermeticity Leak Testing, Thermostatic Bath — One Fluid for Three Uses, NO PFAS Domestic Alternative
TUW-347 and TUW-458 are two hydrofluoroether (HFE) eco-friendly solvents commonly used for cleaning, drying, dust removal, and non-condensable gas elimination. TUW-458 can also serve as a synthesis feedstock and electrolyte additive. This article details the chemical identities, technical parameters, application scenarios, and selection differences between the two products.
HFE Eco-Friendly Solvents TUW-347 & TUW-458: The "Invisible Assistants" for Drying, Dust Removal, and Non-Condensable Gas Elimination