TUW-7200 Electronic Fluorinated Fluid: Precision Cleaning, Hermeticity Leak Testing, Thermostatic Bath — One Fluid for Three Uses, NO PFAS Domestic Alternative
2026-10-16
A piece of equipment, a circuit board, or a test system often requires more than one kind of liquid: cleaning needs a cleaner, leak testing needs a test fluid, and temperature control needs a thermostatic fluid. If a single medium can cover all these needs, procurement, inventory, and management costs can all be significantly reduced. TUW-7200 is precisely such a "one-fluid, multi-use" electronic fluorinated fluid.
1. What Is TUW-7200?
TUW-7200 is a thermally stable perfluorinated liquid benchmarked against 3M Novec 7200. It is designed primarily for precision cleaning and test medium applications, and is a NO PFAS (no per- and polyfluoroalkyl substances) alternative solution. It features excellent chemical inertness, is non-toxic and odorless, non-flammable, has no flash point, low surface tension, excellent thermal conductivity, and is VOC-free.
2. Use 1: Precision Cleaning
As an electronic cleaning agent and precision cleaner, TUW-7200 removes grease, flux residue, and ionic contaminants from precision components. As a grease cleaner, it handles oil and grime in equipment maintenance. Its low surface tension ensures penetrative cleaning of fine structures, and its residue-free evaporation guarantees post-cleaning cleanliness.
3. Use 2: Hermeticity Test Fluid
Hermeticity (leak) testing requires a non-volatile, chemically stable medium that does not affect the part under test. TUW-7200's low volatility, chemical inertness, and high density make it an ideal hermeticity test fluid: the medium is not consumed during testing, does not react with seals, and delivers stable, reliable, and repeatable results.
4. Use 3: Thermostatic Fluid and Cooling Medium
TUW-7200 can be used as a thermostatic fluid and cooling medium: it maintains precise temperatures in constant-temperature baths and carries away heat in cooling loops. Its small viscosity change at low temperatures and excellent thermal conductivity ensure stable response and efficient heat exchange in temperature-control loops.
5. Use 4: Extraction Solvent and Other Applications
TUW-7200 can also serve as an extraction solvent for separating target components from mixtures. Its high insulating properties also support its use as a test medium in voltage testing and similar scenarios. One fluid for multiple uses significantly reduces chemical procurement and inventory management costs.
6. Environmental and Safety Profile
TUW-7200 follows the NO PFAS route: its ODP is zero, so it does not deplete the ozone layer; its GWP is low, greatly reducing greenhouse contribution compared with traditional PFCs; it has no flash point and is non-flammable, making it safe to use. The product meets RoHS and other environmental requirements, supporting compliance in export markets such as Europe where PFAS regulation is tightening.
7. Product Features
The properties of TUW-7200 underpin its stable performance in precision cleaning, hermeticity testing, and temperature-control scenarios:
- Excellent material compatibility, moderate solubility
- Excellent electrical insulation performance (dielectric constant 7.3 @ 1 kHz, dielectric strength 40 kV)
- Excellent thermal conductivity, thermal stability, and chemical stability
- Small viscosity change at low temperatures; pour point as low as −138 °C
- Dries without water marks
- The liquid can be regenerated by distillation and reused
- Low environmental burden: colorless, odorless, non-toxic, ODP = 0, low GWP
- No flash point, non-flammable, safe to use
8. Technical Parameters
The main technical parameters of TUW-7200 are as follows (typical values):
|
Parameter
|
Value
|
|
Boiling range
|
76 °C
|
|
Appearance
|
Colorless liquid
|
|
Density
|
1.42 g/mL
|
|
Surface tension
|
13.63 mN/m
|
|
Dielectric constant (@ 1 kHz)
|
7.3
|
|
Dielectric strength
|
40 kV
|
|
Thermal conductivity
|
0.075 W/m·K
|
|
Specific heat (@ 25 °C)
|
1.22 J/g·°C
|
|
Pour point
|
−138 °C
|
|
Kinematic viscosity (23 °C)
|
0.58 mm²/s
|
|
Average molecular weight
|
264
|
|
Flash point
|
None
|
|
ODP
|
0
|
|
GWP
|
55
|
|
CAS
|
163702-06-5
|
The above parameters are typical product values; actual batches are subject to the Certificate of Analysis (COA).
9. How to Choose Between TUW-7200 and TUW-7300
TUW-7200 and TUW-7300 both belong to the HFE system, but their application focus differs. TUW-7200 is more focused on cleaning, hermeticity testing, temperature control, and other test and cleaning scenarios; TUW-7300 is more balanced between semiconductor equipment temperature control and cleaning. For test equipment and laboratory scenarios, TUW-7200 is preferred; for equipment temperature control with cleaning on the side, choose TUW-7300.
Shenzhen Huayi Xiongdi specializes in the supply of electronic fluorinated fluids and fluorine-containing functional liquids. If you require sample testing, please click the consultation button on the right.
TUW-40 High-Temperature Perfluorocarbon Fluid: -55°C to 155°C Wide Temperature Range — Temperature Control for Etching and Ion Implantation High-Temperature Operations
HFE Eco-Friendly Solvents TUW-347 & TUW-458: The "Invisible Assistants" for Drying, Dust Removal, and Non-Condensable Gas Elimination
Related Article
As AI server rack power density breaks 30 kW, TUW-7500 hydrofluoroether delivers a GWP of just 1, becoming the preferred medium for single-phase immersion cooling. This article details its insulating, non-flammable, and environmentally friendly properties along with deployment verification points.
AI Server Rack Power Breaches 30 kW: Why TUW-7500 Hydrofluoroether Becomes the Preferred Immersion Cooling Medium
TUW-7100 covers precision cleaning, thermal cooling, solvent dilution, and dehydration drying in a single fluid. This article details its physical properties and the cost-saving value of "one fluid, multiple uses."
TUW-7100 Electronic Fluorinated Fluid: One Solution for Precision Cleaning, Thermal Cooling & Drying
TUW-7300 is a thermally stable hydrofluoroether (HFE) electronic fluorinated fluid, benchmarked against 3M Novec 7300. It combines dual capabilities in semiconductor equipment temperature control and precision electronic cleaning. This article systematically analyzes the dual-scenario application value of TUW-7300, covering product positioning, temperature control applications, cleaning processes, performance parameters, and family product selection.
TUW-7300 HFE Electronic Fluorinated Fluid: In-Depth Analysis of Dual Applications in Semiconductor Equipment Temperature Control and Precision Cleaning
Traditional PCB conformal coating is thick, leaves BGA areas uncovered, and damages pads during rework. This article compares TUW-2704 and TUW-1700 fluoropolymer ultra-thin coatings on film thickness, rework, and protection, and provides selection guidance for NEV electronic control and consumer PCBs.
PCB Nano Conformal Coating Selection: TUW-2704 & TUW-1700 vs. Traditional Conformal Coating